HPX 3
HPX 5
The easy to install decarb solution for year round comfort.
Features
Technical Data
Connections
Heat Loss Chart
Documentation
Documentation (Fr)
Features
| HIGH ENERGY EFFICIENCY |
| High Energy Efficiency: Up to a 400% efficiency (COP up to 4) significantly reduces energy bills compared to traditional systems. |
| The HPX™ has an advanced temperature control capability to vary its output ensuring a consistent indoor temperature with less temperature fluctuations. |
| Outdoor reset function automatically varies the outlet water temperature to further enhance comfort and efficiency. |
| Enhanced Vapor Injection (EVI) design increases efficiency, lowers ambient temperature operating range to as low as -22°F/-30°C, and increases maximum supply water temperature. |
| REFRIGERATOR QUIET OPERATION |
| Compared to traditional heating and cooling systems, the HPX™ operates so quietly it can be likened to the sound emitted by a residential refrigerator. 38-53 dB operational sound level. |
| ENVIRONMENTALLY FRIENDLY |
| Air-to-water heat pumps use renewable energy from the air to heat a home. This means that they produce fewer greenhouse gas emissions than traditional heating systems. |
| Enhanced Air Quality: No consumption of fossil fuels means no CO2 emissions. |
| EASY TO INSTALL AND SERVICE |
| Contractor-Friendly Monobloc Design: Refrigeration licenses not required for installation. |
| Easily connect to North American thermostats with 24V AC interface. |
| Increased Reliability: With fewer moving parts than traditional heating systems, the HPX™requires little maintenance and is less likely to break down. |
| Flow-proving and high limit safeties built-in. |
Technical Data
| SPECIFICATIONS | HPX 3 (3 Ton) | HPX 5 (5 Ton) |
| Rated Voltage / Frequency / Phase | 208/230V 60Hz 1Ph | 208/230V 60Hz 1Ph |
| Heating Capacity Range * | 9.6 – 44.2 MBH | 14.4 – 56.6 MBH |
Heating Capacity Range * | 2.8 – 12.9 kW | 4.2 – 16.6 kW |
Cooling Capacity Range ** | 15.5 – 34.5 MBH | 21.4 – 47.6 MBH |
| Cooling Capacity Range ** | 4.55 – 10.1 kW | 6.3 – 14.0 kW |
| Total Load (@240V) | 20.3 A | 26.6 A |
| Noise measured at 1 meter | 38 – 52 dB (A) | 42 – 53 dB (A) |
| Weight (empty) | 220 lb / 100 kg | 320 lb / 145 kg |
| Compressor Rating Load | 19.5 A | 25 A |
| Fan Motor Rating Load | 0.8 A | 2 x 0.8 A |
| Minimum Circuit Ampacity | 25.2 A | 33 A |
| Max Fuse Size | 40 A | 50 A |
| Rated Water Flow | 6.6 gpm / 1.5 m3/h | 7.5 gpm / 1.7 m3/h |
| Water Pressure Drop (Head Loss) | 7 feet / 2.1 m | 9 feet / 2.7 m |
| Maximum Outlet Water Temp. (electronic hi-limit) | 140°F/ 60°C | 140°F/ 60°C |
| Design Water Pressure | 30 psig / 207 kPa | 30 psig / 207 kPa |
| Maximum Water Pressure | 145 psig / 1,000 kPa | 145 psig / 1,000 kPa |
| Minimum Water Pressure | 8 psig / 55 kPa | 8 psig / 55 kPa |
| Minimum Ambient Temperature | -22°F / -30°C | -22°F / -30°C |
| Maximum Refrigerant Pressure (low side) | 305 psig / 2.1 MPa | 305 psig / 2.1 MPa |
| Maximum Refrigerant Pressure (high side) | 638 psig / 4.4 MPa | 638 psig / 4.4 MPa |
| Maximum Allowable Refrigerant Pressure | 696 psig / 4.8 MPa | 725 psig / 5.0 MPa |
| Refrigerant Type and Charge | R410a / 2.2 kg | R410a / 2.5 kg |
| Refrigerant Safety Group Classification | A1 | A1 |
| Moisture Resistance | IPX4 | IPX4 |
| Model Number | HPX 3, IHEXXF1-003T | HPX 5, IHEXXF1-005T |
| Part Number | 016-101 A1 | 016-106 A1 |
| *for conditions Ambient Temp = 45°F (7°C), Outlet Water Temp = 106°F (41°C) | ||
| **for conditions Ambient Temp = 95°F (35°C), Outlet Water Temp = 54°F (12°C) |
| HEAT PUMP FLOW REQUIREMENT | HPX 3 | HPX 5 |
| Rated Water Flow* | 6.6 gpm (1.5 m3/h) | 7.5 gpm (1.7 m3/h) |
| Water Pressure Drop (Head Loss) | 7 ft. / 2.1 m | 9 ft. / 2.7 m |
| Min. Heat Pump Flow Rate (Variable Speed Pump) | 3.1 USgpm (0.7 m3/h) | 4.0 USgpm (0.9 m3/h) |
| Max. Heat Pump Flow Rate (Variable Speed Pump) | 10.1 USgpm (2.3 m3/h) | 12.0 USgpm (2.7 m3/h) |
| Recommended Heat Pump Flow Rate | 7.0 US gpm (1.6 m3/h) | 10.0 USgpm (2.3 m3/h) |
*”Rated” indicated the flow rate at which the heat pump’s heating output, pressure drop, and noise was measured. | ||
| CLEARANCE FOR MOUNTING SITES | |
| Min. Distance From Combustible Surfaces | |
| A | 4’ 11” (1.5m) minimum |
| B | 1’ 8” (0.5m) minimum |
| C | 3’ 3.5” (1.0m) minimum |
| D | 1’ 8” (0.5m) minimum |
| E | 1’ (0.3m) minimum above snow level |
Connections
| PIPING CONNECTIONS | HPX 3 | HPX 5 |
| Return Water Inlet | 1” NPT-M | 1 1/4” NPT-M |
| Supply Water Outlet | 1” NPT-M | 1 1/4” NPT-M |
| Supply Power Knock-Out Dual | 3/4” and 1” | Dual 3/4” and 1” |
| Control Wiring Knock-Out | 1/2” | 1/2” |
Heat Loss Chart
Documentation
Manuals
| ↓ HPX Specification |
| ↓ HPX 3 – Parts Breakdow | |
|
Literature
| ↓ HPX Sales Brochure |
| ↓ HPX Sales Specification Sheet |
| ↓ HPX Warranty |
Documentation (Fr)